Jumbotrac JT1 14'4" JT3 Height of wall is 10'0"

Height of wall is 10'0" and the finished width is 10'6" to allow for the hook/loop overlap and a little space to go around corners of your tent

845" in diameter and 12" or less in length

ultraviolet light from the sun will slowly breakdown these fibers over time

The bottom of the wall is hemmed with a pocket to allow use of the Jumbotrac Plus Wall tensioning system (sold separately)

It is generally used on larger traditional frame tent systems (30' wide/40'wide) where additional angeled braces are needed

Jumbotrac JT1 14'4" JT3 Height of wall is 10'0"This kedered aluminum tubing is used as an eave and ridge frame member in the Jumbotrac frame tent system. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button. Specifications: Base Material: 4. 65" x 2. 06" JT1 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and a 0. 125" wall thickness Finish: Anodized Commercial Clear